Customized factory of Heat Moisture Exchanger Filter in China. Heat Moisture Exchanger Filter uses the patient's own humidity and moisture from the exhaled breath to humidify the anesthetic gas during inhalation. Once the patient is intubated, the upper airway is bypassed, which results in a loss of humidification of the inhaled air. Dry air can have detrimental effects on the patient, so to prevent trauma to the patient, a hygroscopic HME can be used instead of the upper airway to act as a humidifier.
1. Product Introduction of Heat Moisture Exchanger Filter
The Heat Moisture Exchanger Filter has a large condensation surface with hygroscopic coating which helps ensure effective moisture and heat retention thus minimizing the moisture and heat loss of the patient. It help create normal conditions in the patient's airway and lungs, which helps to reduce the risk of breathing and lung complications for patients in critical care and anesthesia environments. The Heat Moisture Exchanger Filter are main made from PPC in medical use, consists of BVF/HMEF cover,Filtration membrane,Wet the paper, HMEF Hold cover and BVF Hold cover.
2. Product Specification of Heat Moisture Exchanger Filter
|
Ref. No.: |
Type: |
Description: |
Recommended tidal volum(ml): |
Moisture Loss |
|
GCR104801 |
HME Combined Type |
Bacterial&Viral’s retention; humidifying, heating the breath between pations and the machine. |
200-1500 |
6.4(@Vt500ml) |
|
Ref. No.: |
Type: |
Description: |
Recommended tidal volum(ml): |
Moisture Loss |
|
GCR104804 |
HME Combined Type |
Bacterial&Viral’s retention; humidifying, heating the breath between pations and the machine. |
200-1500 |
6.9(@Vt500ml) |
|
Ref. No.: |
Type: |
Description: |
Recommended tidal volum(ml): |
Moisture Loss |
|
GCR104803 |
HME Combined Type |
Bacterial&Viral’s retention; humidifying, heating the breath between pations and the machine. |
200-1500 |
6.4(@Vt500ml) |
|
Ref. No.: |
Type: |
Description: |
Recommended tidal volum(ml): |
Moisture Loss |
|
GCR104802 |
HME Combined type for pediatric |
Bacterial&Viral’s retention; humidifying, heating the breath between pations and the machine. |
75-500 |
5.7(@Vt250ml) |
|
Ref. No.: |
Type: |
Description: |
Recommended tidal volum(ml): |
Moisture Loss |
|
GCR104805 |
HME |
Humidifying,heating the breath between pations and the machine; corrugation pipe. |
75-500 |
4.0(@Vt500ml) |
|
Ref. No.: |
Type: |
Description: |
Recommended tidal volum(ml): |
Moisture Loss |
|
GCR104806 |
HME |
With spong inside,humidifying,heating the breath between pations and the machine;corrugation pipe. |
200-1500 |
4.2(@Vt500ml) |
|
Ref. No.: |
Type: |
Description: |
Recommended tidal volum(ml): |
Moisture Loss |
|
GCR104808 |
HME |
Humidifying,heating the breath between pations and the machine. Flexible pipe. |
200-1500 |
4.2(@Vt500ml) |
3. Feature of Heat Moisture Exchanger Filter
1. With high quality.
2. Clear and filter bacteria and dust.
3. Heat storage and keep wet.
4. Avoid the cross infection and lung infections of patients.
5. Apply to all kinds of anesthesia breathing piping system.
6. Sterile by EO.
7. For single use only.
4. Direction for use of Heat Moisture Exchanger Filter
● Open the package by tearing off from the bottom edge.
● Securely connect the product to other components or machine by using a twisting action to ensure a leak free and tight fit.
● Make sure the gas sampling port is closed when not connecting to monitoring line.
● Patient should be monitored constantly whenever the product is use.
5. FAQ of Heat Moisture Exchanger Filter
Q: What is the delivery time if I place my order?
A: Delivery time is around 45 days, if you have special requirements, pls check with us, we will try our best to meet you.
Q: Can you supply the relevant documentation?
A: Yes, we can provide most documentation including CE, ISO13485, FSC, FDA where required.
Q: Can I get samples before my order ?
A: Free samples are available.
Q: What are your prices?
A: Our prices are subject to change depending on supply and other market factors. We will send you an updated price list after your company contact us for further information.
